3M Scotchkote Technical Specification

3M Scotchkote Pipe Coating

Northpoint Ltd is the UK’s largest 3M Scotchkote 206N applicator.┬áPlease find below a list of technical specifications for the 3M Scotchkote 206N coating. Should you require any further information on Pipe Coating, please see our Technical Downloads or alternatively contact us today to speak to one of our specialists.

  • Internal & External Degrease, abrasive blast clean to Swedish Standard SA 2.5 profile to be 40-100 microns. Preheat and apply by fluidised bed technique 3M Scotchkote 206N Fusion Bonded Epoxy Pipe Coating to a minimum thickness of 300 microns. Inspect as required, colour Blue-Green.
  • Masking requirements must be specified at time of quotation and clearly marked on incoming orders and advice notes. All surfaces will be coated unless details are received in writing.
  • 3M Scotchkote 206N is WIS 4-52-01 BSI KITEMARK LICENCE No KM 33446 & DWI approved. It also meets the requirements of the Water Supply (Water Quality) Regulations 1989, Regulation 25 (BS 6920: pt I: 1996) for use as a coating in contact with potable water, and is listed under the materials section part two of the water fittings and materials directory ref: 0005504
  • Northpoint Ltd is listed as an approved regulation 31(a) FBE applicator on the DWI website

3m skotchkote pipe coating

For further information on our 3M Scotchkote application services please contact a member of our team today.